Technical Data Sheet

Technical performances are strictly related to the type pine used and to the panel’s composition, that is made considering standard veneer thickness and number in either long or short grain.

Below, average values refer to standard productions.

Physical-mechanical Reference Standard Measuring Unit Thickness
Properties 1 18 21
Density +/- 5%kg/m³ 525 525
Bending strength Parallel EN310; SANS 929 Mpa 5008
5th percentile Perpendicular EN310; SANS 929 Mpa 1887
Module of elasticity Parallel EN310; SANS 929 Mpa 4191
5th percentile Perpendicular EN310; SANS 929 Mpa 1901
Characteristic Stree Parallel Mpa 15.13 13.45
(MOR) Lim. States design Perpendicular Mpa 12.72 11.93
Grade Stress Parallel Mpa 6.81 7.48
(allowable stress design) Perpendicular Mpa 4.74 5.68
Formaldehyde BS EN 120:1992 mg/100g Board 0.8 0.8
Glue SANS 929 S3 S3
Thermal conductivity ASTM C518 and T0178-WI-015 W/m.K 0.108 0.107
Thermal resistance ASTM C518 and T0178-WI-016 m².K/W 0.164 0.194
Thermal conductance ASTM C518 and T0178-WI-017 W/m².K 6.103 50158

1 N/mm² = 1 Mpa = 10.2kg/m²

This technical data sheet is not a contract reference document. Given average/5th percentile values are linked to internal test effected at BEUP and SABS (unless diffrently precised) and are subject to change without advise in accordance to production requirements.

Plywood Grades

Appearance Grades: A & BStructural Grades: C+/C
Primary uses being paneling and furniture (face grade).Most commonly used in Shuttering applications, brick pallets and flooring
Appearance Grade Thicknesses: 6 mm, 9 mm, 12 mm, 16 mm, 25 mm, 28 mm, 32 mmStructural Thicknesses: 18 mm, 21 mm, 25 mm, 28 mm, 32 mm